Press Drawing Oil

Product  Application Density
 @ 15°C
 (g/cm3) 		 Viscosity 
@ 40°C
(mm2/s)		 Flash point
(°C)		 Cu Corrosion
(100°C * 1Hr)
DAPHNE PRESS ER 68(B)   For used as press forming oil for pressing bodies of automobiles and machinery parts.  Recommended for steel sheet which require short term rust preventive property. 0.8846 66.92 246 - 
DAPHNE PRESS GL 100  For used as press oil for pressing bodies of automobiles and of cultivating machines and for various electric appliances parts,
excellent in pressing property, workability and rust preventive property.		 0.8870 100.2 248 - 
DAPHNE DYNA DRAW FS-ZD2  Chlorine-free plastic foaming oil. It’s applied for forging of steel sheet, blanking, drawing of steel sheet and etc. 0.9670 56.45 224 1a 
DAPHNE DYNA DRAW FS-T2  0.9553 116.5 236 1a 
DAPHNE PRESS DRAW 35 S  A non-chlorinated, sulfur type press working oil for light press drawing of steel plates. For pressing bodies of automobiles and cultivating machines and for various electric appliances parts, excellent in ressing property,  workability and rust preventive property. 0.8863 14.48 174 4c 
 DAPHNE PRESS DRAW 45 S   0.9132 30.25 184 4c 
 DAPHNE PRESS DRAW 55 S   0.9312 53.21 202 4c 
DAPHNE PRESS DRAW 75 S  0.9502 123.4 210 4c 
DAPHNE PRESS DRAW 115 S  0.9152 239.9 244 4c 
DAPHNE DRAW SOLUBLE EN 

This lubricant is one of our newest water soluble type products employing the latest technology in chemical additive to improve lubricity and water solubility.

  • For drawing of copper tube, rod and wire.
  • It can be also used as cold reducer oil for copper and copper alloy.
0.9464 53.76 196 - 
DAPHNE MASTER DRAW ND 20 
  • For press-forming of aluminum and aluminum alloy sheet.
  • Applicable also for a light duty press-forming of steel sheet.
0.8681 21.63 210 1a 
DAPHNE MASTER DRAW 533 WD  This lubricant is one of our newest products employing the latest technology in chemical additives to improve lubricity and bright annealing properties.  Suggested for O.D. use of small copper tubes on high speed bull blocks and benches. 0.8671 85.44 204 1b 
DAPHNE MASTER DRAW 560  0.8750 117.4 188 1a 
DAPHNE MASTER DRAW 530 LS  0.8710 279 178 1b 
DAPHNE MASTER DRAW 550 NR  0.8754 486.3 204 1a 
DAPHNE MASTER DRAW 565 NR  0.8862 901.4 188 1a